TucsonDataManu

.com

Hyundai Tucson: Timing System

Hyundai Tucson - Fourth generation (NX4) - (2020-2023) - Workshop Manual / Engine Mechanical System / Timing System

READ NEXT:

 Timing System - Replacement

Components Variable force solenoid valves Timing chain cover Cam to cam guide Timing chain Timing chain tensioner arm Timing chain tensioner arm Timing chain tensioner Crankshaft sprocket Oil pump chain Oil pump chain tensio

 Timing System - Installation

Keep the liquid gasket sealing surfaces (timing chain cover, cylinder head, cam carrier, cylinder block, lower crankcase) free from foreign matters, cured sealant, oil, dust, moisture and etc. Spray the cleaner on the sealing surface and

 Timing System - Removal

Disconnect the battery negative terminal. Turn the crankshaft damper pulley clockwise, and align its groove with the timing mark of the timing chain cover. Remove the timing chain cover. (Refer to Timing System - "Timing C

SEE MORE:

 48V Battery System - Removal

Turn the ignition switch OFF and disconnect the battery (-) terminal. Remove the luggage board (A). Disconnect the BMS ECU extension wiring harness connector (A). Disconnect the inverter power cables (A). Tightening torque

 Outside Rear View Mirror - Installation

Outside Rear View Mirror Installation Install the outside rear view mirror and connect the connector. Tightening torque : 6.9 - 10.8 N.m (0.7 - 1.1 kgf.m, 5.0 - 8.0 lb-ft) Connect the negative (-) batteiy terminal. Front/Rear Turn Sig

Information