TucsonDataManu

.com

Hyundai Tucson: Display audio - Removal

Hyundai Tucson - Fourth generation (NX4) - (2020-2023) - Workshop Manual / Body Electrical System / Audio / Display audio - Removal

Disconnect the negative (-) battery terminal.
Remove the front monitor lower cover (A).

Remove the front monitor lower cover after disconnecting the mood lamp connector

Remove front monitor side cover (A) and (B).

Remove the front monitor assembly (A).

Remove the front monitor assembly (A) after disconnecting monitor connectors.

Remove the audio unit (A) after loosening mounting screws.

Remove the audio unit after disconnect audio connectors (A).

Audio - Removal

Disconnect the negative (-) battery terminal. Remove the front monitor lower cover (A). Remove the front monitor lower cover (A) after disconnecting the mood lamp connector (A). Remove front monitor side cover (A) and (B).

Remote Control Switch

Components Left Remote Control Switch (Audio) Right Remote Control Switch (Cruise) Schematic Diagrams Audio + B/Tooth+Voice+TRIP+SCC+MSLA+LFA Audio + B/Tooth+Voice+TRIP+SCC+MSLA+LFA+Paddle Shift Inspection Check for resis

Monitor cover

Remove the front monitor lower cover after disconnecting the mood lamp connector Remove front monitor side cover (A) and (B). Remove the front monitor assembly (A). Remove the front monitor assembly (A) aft

SEE MORE:

Rear Glass Defogger

Inspection Wrap tin foil around the end of the voltmeter test lead to prevent damaging the heater line. Apply finger pressure on the tin foil, moving the tin foil along the grid line to check for open circuits. Turn on the defogger swit

Tie rod end

Remove the tie rod end after loosening the nut. Tightening torque : 49.0 - 53.9 N.m (5.0 - 5.5 kgf.m, 36.2 - 39.8 lb-ft) WARNING Before removing the tie rod end, note by measuring the length of the thread or marked with paint. Repl