Hyundai Tucson: Clutch System
- General Information
- Clutch Cover And Disc
- Ignition Lock & Clutch Switch
- Clutch Pedal Stroke Sensor
- Clutch Pedal
- Clutch Tube
- Clutch Regulator
- Clutch Master Cylinder
- Concentric Slave Cylinder Assembly
READ NEXT:
General Information
Specifications
Service Standard
Tightening Torques
Lubricants
Special Service Tools
Troubleshooting
Clutch Cover And Disc- Removal
Remove the manual transaxle assembly.
(Refer to In case by Gasoline 1.6 T-GDI System - "Manual Transaxle")
(Refer to In case by Diesel 1.6 TCI System - "Manual Transaxle")
(Refer to In case by Gasoline 2.0 MPI System - &qu
SEE MORE:
DCT (Dual Clutch Transmission) System (SBW)- Installation
Installation
To install, reverse the removal procedure.
WARNING
Matters that require attention when installing the dual clutch
transmission (DCT) to engine
l)Check the pilot bearing (B) and external damper (A) 011 the side of engine for
Tie rod end
Remove the tie rod end after loosening the nut.
Tightening torque :
49.0 - 53.9 N.m (5.0 - 5.5 kgf.m, 36.2 - 39.8 lb-ft)
WARNING
Before removing the tie rod end, note by measuring the length of the
thread or marked with paint.
Repl
Information
- Home
- Hyundai Tucson - Fourth generation (NX4) - (2020-2023) - Owner's Manual
- Hyundai Tucson - Fourth generation (NX4) - (2020-2023) - Workshop Manual
