TucsonDataManu

.com

Hyundai Tucson: Owner maintenance

Hyundai Tucson - Fourth generation (NX4) - (2020-2023) - Owner's Manual / Maintenance / Owner maintenance

WARNING

Performing maintenance work on a vehicle can be dangerous. If you lack sufficient knowledge and experience or the proper tools and equipment to do the work, we recommend that having it done by an authorized HYUNDAI dealer.

ALWAYS follow these precautions for performing maintenance work:

  • Park your vehicle on level ground.

    Shift the vehicle to P (Park), apply the parking brake, and press the Engine Start/Stop button to the OFF position.

  • Block the tires (front and back) to prevent the vehicle from moving.

    Remove loose clothing or jewelry that can become entangled in moving parts.

  • If you must run the engine during maintenance, do so out doors or in an area with plenty of ventilation.
  • Keep flames, sparks, or smoking materials away from the battery and fuel-related parts.

WARNING

Touching metal parts

Do not touch metal parts (including strut bars) while the engine is operating or hot. Doing so could result in serious personal injury. Turn the engine off and wait until the metal parts cool down to perform maintenance work on the vehicle.

The following lists are vehicle checks and inspections that should be performed by the owner or an authorized HYUNDAI dealer at the frequencies indicated to help ensure safe, dependable operation of your vehicle.

Any adverse conditions should be brought to the attention of your dealer as soon as possible.

These Owner Maintenance vehicle checks are generally not covered by warranties and you may be charged for labor, parts and lubricants used.

Owner maintenance schedule

When you stop for fuel:

  • Check the coolant level in the engine coolant reservoir.
  • Check the windshield washer fluid level.
  • Check for low or under-inflated tires.

WARNING

Be careful when checking your coolant level when the engine is hot. This may result in coolant being blown out of the opening and cause serious burns and other injuries.

While operating your vehicle:

  • Note any changes in the sound of the exhaust or any smell of exhaust fumes in the vehicle.
  • Check for vibrations in the steering wheel. Notice if there is any increased steering effort or looseness in the steering wheel, or change in its straight-ahead position.
  • Notice if your vehicle constantly turns slightly or "pulls" to one side when traveling on smooth, level road.
  • When stopping, listen and check for unusual sounds, pulling to one side, increased brake pedal travel or "hardto- push" brake pedal.
  • If any slipping or changes in the operation of your transmission occurs, check the transmission fluid level.
  • Check the automatic transmission P (Park) function.
  • Check the parking brake.
  • Check for fluid leaks under your vehicle (water dripping from the air conditioning system during or after use is normal).

At least monthly:

  • Check coolant level in the engine coolant reservoir.
  • Check the operation of all exterior lights, including the stoplights, turn signals and hazard warning flashers.
  • Check the inflation pressures of all tires including the spare for tires that are worn, show uneven wear, or are damaged.
  • Check for loose wheel lug nuts.

At least twice a year:

  • Check radiator, heater and air conditioning hoses for leaks or damage.
  • Check windshield washer spray and wiper operation. Clean wiper blades with a clean cloth dampened with washer fluid.
  • Check headlamp alignment.
  • Check muffler, exhaust pipes, shields and clamps.
  • Check the seat belts for wear and function.

At least once a year:

  • Clean body and door drain holes.
  • Lubricate door hinges and hood hinges.
  • Lubricate door and hood locks and latches.
  • Lubricate door rubber weather strips.
  • Check the air conditioning system.
  • Inspect and lubricate automatic transmission linkage and controls.
  • Clean the battery and terminals.
  • Check the brake fluid level.

    READ NEXT:

     Scheduled maintenance services

    Follow Normal Maintenance Schedule if the vehicle is usually operated where none of the following conditions apply. If any of the following conditions apply, you must follow the Maintenance Under Severe Usage Conditions. Repeated driving sh

     Explanation of scheduled maintenance items

    Engine oil and filter The engine oil and filter should be changed at the intervals specified in the maintenance schedule. If the vehicle is being driven in severe conditions, more frequent oil and filter changes are required. Drive belts Insp

     Engine oil

    Checking the engine oil level Engine oil is used for lubricating, cooling, and operating various hydraulic components in the engine. Engine oil consumption while driving is normal, and it is necessary to check and refill the engine oil regularl

    SEE MORE:

     Clutch Pedal Stroke Sensor

    Removal Turn ignition switch OFF and disconnect the negative (-) battery cable. Disconnect the clutch pedal stroke sensor connector (A). Loosen the bolts (A) and then removing the clutch pedal stroke sensor (B). Installation

     Intelligent speed limit assist (ISLA)

    Intelligent Speed Limit Assist uses information from the detected road sign and navigation system to inform the driver of the speed limit and additional information of the current road. Also, Intelligent Speed Limit Assist helps the driver to m

    Information