TucsonDataManu

.com

Hyundai Tucson: LCD display message (button type)

Hyundai Tucson - Fourth generation (NX4) - (2020-2023) - Owner's Manual / Driving your vehicle / Automatic transmission / LCD display message (button type)

*The actual message may differ from the following LCD display message.

*The application of the following message may vary according to the vehicle model.

Shifting conditions not met. Reduce speed, then shift

The warning message appears on the LCD display, when engine RPM is too high, or when driving speed is too fast to shift the gear.

We recommend you decrease the engine speed or slow down before shifting the gear.

Press brake pedal to change gear

The warning message appears on the LCD display, when the brake pedal is not depressed while shifting the gear.

We recommend you to depress the brake pedal and then shift the gear.

Shift to P after stopping

The warning message appears on the LCD display, when the gear is shifted to P (Park) while the vehicle is moving.

Stop the vehicle before shifting to P (Park).

PARK engaged

Make sure that the vehicle is completely stopped before shifting to P (Park).

Push-button gear selector

If the gear selector is shifted to P (Park) while the vehicle is still moving, a warning message will appear in the LCD display.

Press and hold the OK button on the steering wheel to stay in Neutral

The warning message appears on the LCD display, when pushing the N (Neutral) button. If you want to stay N (Neutral) after turning off the engine, press and hold the "OK" button on the steering wheel more than 1 second.

Vehicle will stay in (N). Change gear to cancel

The warning message appears on the LCD display, when pushing the "OK" button on the steering wheel after the message ("Press and hold OK button to stay in Neutral when vehicle is Off") appears on the cluster LCD display. The gear stays in N(Neutral) position after turning off the engine.

NEUTRAL engaged

The message appears on the LCD display, when the N (Neutral) position is engaged.

Gear already selected

The message appears on the LCD display, when pushing the current shift button again.

Shift button held down / Shift button is stuck

The warning message appears on the LCD display, when the shift button is pressed continuously or the shift button does not properly operate. Clean the surroundings of gear shift button.

If this message appears again, we recommend you to have the vehicle inspected by an authorized HYUNDAI dealer.

Shifter system malfunction! Service immediately

The warning message appears on the LCD display, when the transmission or the shift button does not properly operate in the P (Park) position.

In this case, we recommend you to immediately have the vehicle inspected by an authorized HYUNDAI dealer.

Check shift controls

The warning message appears on the LCD display, when there is a malfunction with transmission shift button.

In this case, we recommend you to immediately have the vehicle inspected by an authorized HYUNDAI dealer.

Paddle shifter (Manual shift mode)

The paddle shifter is available when the shift lever/button is in the D (Drive) position or the manual shift mode. With the shift lever/button in the D position The paddle shifter will operate when the vehicle speed is more than 6mph. Pu

Good driving practices

Never move the shift button from P (Park) or N (Neutral) to any other position with the accelerator pedal depressed. Never move the shift lever/button into P (Park) when the vehicle is in motion. Be sure the vehicle is completely sto

Braking system

Power-assist brakes Your vehicle has power-assisted brakes that adjust automatically through normal usage. If the engine is not running or is turned off while driving, the power assist for the brakes will not work. You can still stop your ve

SEE MORE:

ESC Control unit (HECU)

Components Front - right (FR) Rear - left (RL) Rear - right (RR) Front - left (FL) MC2 MCI ESC Control unit (HECU) connector Bracket ESC Control unit (HECU)- Removal Removal Disconnect the battery negative ( - ) terminal.

Cylinder Head Assembly

Components Front camshaft bearing cap Intake camshaft bearing cap Exhaust camshaft bearing cap Cam carrier Fuel pump adaptor Engine hanger Cylinder head Cylinder head gasket Intake OCV center bolt Intake OCV center bolt