TucsonDataManu

.com

Hyundai Tucson: Front Seat

Hyundai Tucson - Fourth generation (NX4) - (2020-2023) - Workshop Manual / Body (Interior and Exterior) / Front Seat

Front seat assembly

Component Location Front seat assembly Replacement Disconnect the negative (-) battery terminal. Open the cover and loosen the front seat mounting bolts. Front Tightening torque : 49.0 - 63.7 N.m (5.0 - 6.5 kgf.m, 36.2 - 47.0 lb

Front seat shield outer cover

Component Location Front seat shield outer cover Replacement WARNING When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components. Put on gloves to prevent hand inj

Front seat shield inner cover/ Front seat back cover

Component Location Front seat shield inner cover Replacement WARNING When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components. Put on gloves to prevent hand inj

SEE MORE:

Immobilizer System - Removal

Removal Disconnect the negative (-) battery terminal. Remove the heater control unit. (Refer to Heating,Ventilation And Air Conditioning - "Heater Control Unit") Loosen the mounting bolt,nut,screw and remove the Integrated Body

Clutch Regulator

Components and Components Location Clutch pedal arm Clutch pedal assembly Reservoir hose Regulator Cluch tube Clutch hose Removal Remove the air cleaner assembly and air duct. (Refer to In case by Gasoline 1.6 T-GDI System